LSF SWA cable is a low smoke & fume steel wire armoured BASEC approved mains and control cable also known as LSZH low smoke zero halogen. LSF cable can be installed internally or externally but it is predominately used where smoke emissions pose as a potential hazard to the enivironment in the event of a fire.
All cables within this section are 600/1000 volts and manufactured in accordance to BS6724.
Temperature limits: -15°C to +90°C
*Bending radius:
8 x overall diameter
Core Identification:
2 core - Brown, Blue
3 core - Brown, Black, Grey
4 core - Brown, Black, Grey, Blue
5 core 1.5 to 6mm2 - White with Black numbers OR colored cores as per next line down
7 core and above = white cores with black numbers
5 core - 10mm2 and 16mm2 - Brown, Black, Grey, Blue, Green/Yellow
Please note: The Superlec Direct team are not qualified as electricians or any other tradesmen. If you require advice on which cable to use, how and where to install it, it is recommended that you will need to contact the relevant qualified tradesperson for the job.
