78MM Mains powered thermal heat alarm device with wireless interlink and battery back-up.
BS 5446 Part 2
BATTERY TYPE: Non-replaceable 10 year battery
NORMAL OPERATION: Red LED flashes every 48 seconds for normal operation. Green LED shows mains power on.
BATTERY LIFE: Minimum 10 years life of the backup battery (1 year without power supply).
INTERLINK FREQUENCY: 868MHz
INTERLINK RANGE: Minimum 100m in the open field. Range depends on the building materials and will need to be tested in each individual case.
SOUND: Audible indicator min. 85 dB @ 3 meters in an anechoic chamber.
OPERATION AC/DC: 110V AC, 230V AC
LOW BATTERY INDICATION: A short acoustic “beep” will sound and LED flash every 48 seconds when the voltage is below 2.85V. In this stage, it will continue for a minimum of 30 days and can drive the alarm for 4 minutes.
SOUND PATTERN: Heat alarm condition is indicated by a series of three successive tones.
USAGE: Designed for installation in private homes or garages with risk for a smoky, dusty, or humid environment, for example, kitchen and garage area.
This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand-alone alarm.
Placed max 5,3 meters away from any heating source.
VISIBLE INDICATORS: A red LED is used to indicate the following conditions:• In normal mode the LED will flash every 48 seconds to show the correct operation
• When a rapid change of temperature is detected, the heat alarm will go into ‘Alarm Mode’. It will sound the alarm signal or the LED will flash rapidly
• A green LED is used to show the alarm is powered by mains supply
PRODUCT WEIGHT: Base alarm weight (excluding screws, plugs, and mounting ring): 108g.
PRODUCT DATA:
FUNCTION: The alarm makes a reading every 2 seconds.
INSTALLATION POSITION: Wall & ceiling. Set of 2 x screws and 2 x plugs included.
PRODUCT DIMENSIONS: D: 78 mm. x H: 48 mm.
SIGNALS: Transmits RF signals to the CAVIUS Wireless Family
