BS8436 4 Core 4mm² XLPE LSZH Cable 100m Reel

Overview

The protected fixed wiring cable is an alternative cable which can be used in place of steel wire armoured cables or singles cables. Intended for installation in air (which includes installation in trunking or other closed systems), and in thin partitions and buillding voids when connected to a suitably selected protective
device. When cables are to be installed in any other environment, reference should be made to the cable manufacturer. 

Standards

• 1mm² – 4mm², & 10mm² to BS8436
  6mm² manufactured to IS273
• BS EN 50267-1:1998
• Acid gas emissions to BS EN 50267-2-1
• Smoke emissions to BS EN 50268-2

Construction

• Conductor: Plain Annealed Stranded Copper
• Earth: Bare tinned annealed copper earth wire
• Insulation: Cross linked Polyethylene (XLPE)
• Armouring: Bonded Aluminium Tube
• Sheath: Low Smoke Zero Halogen (LSZH)
• Sheath Colour: White
• Available on Request: solid cores, different sheath and core colours, 10mm² and 16mm²

Characteristics

• Voltage Rating:
  1mm²– 4mm²: 300/500 Volts
  6mm² – 10mm² : 600/1000 Volts
• Temperature Limits:
  Do not install at temperatures below 0°C
  Maximum continuous conductor operating -20 to +90°C

Should not be installed at temperatures below 0°C or above +60°C.

Core IDs

• 2 Core: Brown, Blue
• 3 Core: Brown, Black, Grey
• 4 Core: Brown, Black, Grey, Blue
• Earth: Tinned annealed copper earth wire

For more information please consult a member of the Superlec Sales Team.

Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.