Bendex HG20BK 20mm x 3m PVC Conduit Heavy Gauge Black

Bendex 3 metre conduit is used to help guide cables and wiring around the home / site or work place.

Each length is manufactured from robust heavy gauge PVC which offers protection for the cable.

20mm conduit is available in either black or white.

This is an oversized item and will incur a one off surcharge of £4.17 (plus VAT) per order.

For surface mounting and containment of low voltage cabling
A range of moulded accessories facilitate both the mounting of and accommodation of direction changes & terminations.
May be bent with the use of the applicable size and type of bending spring (Green Tip)

Compliance
Manufactured to the applicable requirements of BS EN 61386-1:2008
Conduit Systems for cable management – General requirements

Material
PVC-u (Poly Vinyl Chloride – un-plasticised).

Operating Temperature
-5°C to +60°C (The product should not be exposed to the upper temperature limit for prolonged periods of time).
Fire Performance:
Non-flame propagating – under an applied flame the flame does not propagate & will extinguish itself once the applied flame is removed. Does not drip flaming particles.

Spread of Fire
To the requirements of BS EN 61386-1:2008

Vertical Burning Test (UL-94)
V-0 @ 1.6mm

Chemical Properties
Excellent resistance to many chemical
solutions including those of weak acids,
strong & weak alkalis, alcohols, aliphatic
hydrocarbons and is soluble or will swell in
ketones.

Water Absorption
Negligible. PVC-u is impervious to damp
conditions and will not corrode.

Electrical Properties
PVC-u is non-conductive and therefore will
not become live due to accidental contact
with live conductors. It has a typical
insulation resistance of more than 100MO

Vicat Softening Point – Raw Material (Please
also note operating temperature data
above)
80°C

Thermal Properties
Co Efficient of Liner Expansion 7 x 10?5/m/°C

Hazard Information
No specific hazards as the ingredients are
bound into the PVC-u matrix and are thus
rendered virtually insoluble. (See also Falcon
Product Safety Data Sheet)

REACH (Registration, Evaluation,
Authorisation & Restriction of Chemicals)
May contain SVHC – see product specific
REACH declaration for full details.

Standard Colour White and Black

Standard Length 3 Metres. Also available in other lengths on
request.

Nominal Dimensions
HG20 – 20mm Outside Diameter x 1.7mm
wall thickness
HG25 – 25mm Outside Diameter x 1.9mm
wall thickness

Cross Sectional Area
HG20 - 216.4 mm²
HG25 - 353.0 mm²

Usable Cross-Sectional Area (45%)

HG20 – 97.4 mm²
HG25 - 158.8 mm