Overview
Telecommunication cable is predominantly used in electrical instrumentation and communications. The cable is manufactured to specification ENATS 09-6 Section 4.5. (Electrical National Association and Technical specification). ENATS is the governing body who cover utilities specification cables.
Standards
- ENATS 09-6: Issue 8 Section 4.5
- Flame propagation to:
IEC BS4066 PT1
IEC 332 PT1
Construction
- Conductor: Solid Plain Annealed Copper Conductors
- Screen: Collective Aluminium / Mylar tape screen with 0.5mm2 drain wire
- Insulation: Polyvinyl Chloride (PVC)
- Bedding: Polyvinyl Chloride (PVC)
- Armouring: Galvanised Steel Wire Armour
- Sheath: Polyvinyl Chloride (PVC)
- Sheath Colour: Black
Characteristics
- Temperature Limits: -20°C to +70°C
- Minimum Bending Radius: As per manufacturers datasheet
Should not be installed at temperatures below 0°C or above +40°C
Core IDs
Please note: If you require advice on which cable to use or how and where to install it, it is recommended that you consult a relevant qualified tradesperson. The Superlec Direct team are not qualified electricians.
